FEATURES – BLE Firmware

Being the BLE technology across many business sectors, our goal is to propose a complete solution. It is for this reason that different BLE firmware, featured by different functions, are available. Each firmware can be chosen during the order process and loaded before delivering.

Standard Firmware. (P.N. GT-STD-FW). 

  • Press button for 3sec. to Switch ON/OFF the device.
  • Possibility to reset to factory parameters.
  • Friendly Name and battery level broadcast in Scan Response.
  • iBeacon / Eddystone UID / Eddystone TLM / Eddystone URL protocols available.
  • Advertising interval from 100ms. to 10s. (step by 100ms.)
  • 4 power level -23dB (about 15mt.), -6dB (about 80mt.), 0dB (about 110mt.), +4dB (about 200mt.)
    Password to have access to memory content.

Sensor Firmware. (P.N. GT-SNSR-FW).

  • Press button for 3sec. to Switch ON/OFF the device.
  • Possibility to reset to factory parameters.
  • Friendly Name and battery level broadcast in Scan Response.
  • iBeacon / Eddystone UID / Eddystone TLM / Eddystone URL protocol available
  • Advertising interval from 100ms. to 10s. (step by 100ms.)
  • 4 power level -23dB (about 15mt.), -6dB (about 80mt.), 0dB (about 110mt.), +4dB (about 200mt.)
  • Password to have access to memory content
  • 4 different function modes for g-sensor (Connection Mode, Advertising Mode, Real-Time Mode, Trigger Mode). 2 different function modes for temperature sensor (in Scan Response and also in Eddystone TLM). 2 different function modes for humidity sensor (in Scan Response and also in Eddystone TLM)

Alarm + Led Firmware. (P.N. GT-LRM_LD-FW)

  • Press button for 3sec. to Switch ON/OFF the device.
  • Possibility to reset to factory parameters.
  • Friendly Name and battery level broadcast in Scan Response.
  • iBeacon / Eddystone UID / Eddystone TLM / Eddystone URL protocols available.
  • Advertising interval from 100ms. to 10s. (step by 100ms.).
  • 4 power levels -23dB (about 15mt.), -6dB (about 80mt.), 0dB (about 110mt.), +4dB (about 200mt.).
  • Password to have access to memory content.
  • Alarm function, which allows to send different advertising packets, for a settable interval of time, by clicking twice the button in non-connection mode. This FW works on standard beacons and also on sensor beacons.
  • Service for activation of the red LED, blinking every settable time interval. This FW works on standard beacons and also on sensor beacons.

Longer Advertising Interval firmware (P.N. GT-LAI-FW).

  • Press button for 3sec. to Switch ON/OFF the device.
  • Possibility to reset to factory parameters.
  • Friendly Name and battery level broadcast in Scan Response.
  • iBeacon / Eddystone UID / Eddystone TLM / Eddystone URL protocols available.
  • Advertising interval from 100ms. to 10s. (step by 100ms.)
  • 4 power levels -23dB (about 15mt.), -6dB (about 80mt.), 0dB (about 110mt.), +4dB (about 200mt.).
  • Password to have access on memory content.
  • The advertising interval service can accept value up to 10minutes, more than 10sec. both in iBeacon and Eddystone protocols.
    This FW works on
     standard beacons and also on sensor beacons.

Frame Interval firmware (P.N. GT-FRMINT-FW).

  • Press button for 3sec. to Switch ON/OFF the device.
  • Possibility to reset to factory parameters.
  • Friendly Name and battery level broadcast in Scan Response.
  • iBeacon / Eddystone UID / Eddystone TLM / Eddystone URL protocols available.
  • Advertising interval from 100ms. to 10s. (step by 100ms.)
  • 4 power levels -23dB (about 15mt.), -6dB (about 80mt.), 0dB (about 110mt.), +4dB (about 200mt.).
  • Password to have access on memory content
  • Special “Frame Interval FW” service, which is described here below:

a) Frame Interval (from 1min to 3600min).Time from a cycle of advertising packets and the next one
b) Frame – N° of advertising packets to be sent in each Frame Interval (from 5 to 100)
c) Beacon Interval – Time interval between an advertising packet and the next one, inside a Frame (from 100ms. to 10sec.)
This FW works with IBeacon protocol. Not implemented with Eddystone protocol.
This FW works on standard beacon only (not sensor).

Further, hardware has been designed to be flexible and multifunctional, in order to meet the different needs of the market.

DISCOVER BLE BEACON WORLD BY